Installation Guide

Easy setup in 15 minutes — no professional installation required

Before You Begin

Installing your HAIMMY electric infrared patio heater is straightforward and requires only basic tools. Please read all instructions before starting installation.

🛠️ Tools You'll Need

Phillips head screwdriver
Measuring tape
Level (for wall-mounted models)
Pencil for marking
Power drill with bits (for wall-mounted models)

⚡ Safety First

Important: Ensure the heater is unplugged during installation. Only connect to power after assembly is complete and you have verified all connections are firmly secured.

Step-by-Step Installation

1️⃣

Unbox Carefully

Remove heater and components carefully. Check all parts against the included parts list.

2️⃣

Choose Location

Select a stable, level surface at least 3 feet from walls, furniture, and combustible items.

3️⃣

Assemble Base

For stand models: attach the base plate using the provided hardware and tighten securely.

4️⃣

Mount Bracket

For wall models: use a spirit level to mark holes, drill into studs, and secure bracket.

5️⃣

Attach Heater

Slide the heating unit onto the stand or bracket until you hear a click indicating it is locked.

6️⃣

Test Operation

Plug into a standard 110V-120V outlet and test all heat settings before regular use.

⚡ Electrical Requirements

Voltage: 110V - 120V AC
Power: 1500W maximum
Plug: Standard 3-prong grounded plug
Circuit: Dedicated 15A circuit recommended

Warning: Do not use extension cords or plug into overloaded power strips.

📏 Positioning Guidelines

Maintain minimum 3 feet clearance from walls and combustibles.
Do not position directly beneath low ceilings or awnings.
Outdoor use requires a GFCI-protected outlet.
Always place on a stable, level surface for tip-over protection.

Need Installation Help?

Our customer support team is available to assist you with installation guidance or troubleshooting.

Contact Support